xtc_fr27_dark_blue_color Template IDxtc_frings27_dbc_sp2 Template by Hartmut Frings
Bass Guitar Effects
100V P.A Systems
Beamers & Projectors
Information about manufacturer
Please enter the article number from our catalogue.
Shipping & Returns
General Terms & Conditions
Adress & Bank Details
Review this product!
articles in this categorie
CRATE GT212 Flexwave Guitar Combo 120W 2x12"
instead 498,00 EUR
only 399,00 EUR
incl. 19 % Tax excl.
Product No.: CR-GT212
Print product data sheet
Featuring Twin Crate Custom L 12" speakers, 120 watts RMS, the GT212 is a powerhouse of tone. Front panel RCA input jacks allow you to play along with your favorite CD or tape. The rear panel Insert Jack allows you to connect your effects for greater flexibility. Channel switching and reverb may be controlled by means of a footswitch. The GX212 includes Crate's patented tube simulating Flexwave 5 Preamp, as well as three-channel operation for sparkling clean, rhythm, and buttery distortion.
Player Type: The GT212 is for players who require a powerful, versatile, hard working amp with straight ahead tone. This amp is designed to perform for just about every situation, the most often being a rehearsal or venue environment.
1: INPUT: Use this jack to connect your guitar to the amplifier by means of a shielded instrument cable.
SOLO/RHYTHM CHANNELS: High gain channels giving you sounds with serious overdrive.
2: SOLO LED: This LED illuminates when the Solo channel is selected.
3: GAIN: Use this control to adjust the amount of distortion produced by the Solo channel.
4: SHAPE: Use this control to "dial in" the tone for the Solo channel. Rotating the control counterclockwise
enhances the mid frequencies, while rotating the control clockwise enhances the low and high frequencies.
5: LEVEL: Use this control to adjust the output level of the Solo channel.
6: SOLO/RHYTHM SELECT: Use this switch to select the Solo or Rhythm channel. When this switch is
depressed, the Solo channel is selected. With the switch in the out position, the Rhythm channel is select-ed.
This switch is active only when the Solo-Rhythm/Clean Select switch (#13) is depressed.
7: RHYTHM LED: This LED illuminates when the Rhythm channel is selected.
8: GAIN: Use this control to adjust the amount of distortion produced by the Rhythm channel.
9: LOW: Use this control to adjust the low frequency level of the Solo/Rhythm channel.
10: MID: Use this control to adjust the midrange frequency level of the Solo/Rhythm channel.
11: HIGH: Use this control to adjust the high frequency level of the Solo/Rhythm channel.
12: LEVEL: Use this control to adjust the output level of the Rhythm channel.
13: SOLO-RHYTHM/CLEAN SELECT: Use this switch to select the Clean channel or the Solo and
Rhythm channels. With the switch in the out position, the Clean channel is selected. When the switch is
depressed, either the Solo or Rhythm channel is selected, depending on the setting of the Solo/ Rhythm
Select switch (#6).
CLEAN CHANNEL: A normal gain channel designed to give you crystal clean sounds.
14: CLEAN LED: This LED illuminates when the Clean channel is selected.
15: VOL: Use this control to adjust the output level of the Clean channel.
16: LOW: Use this control to adjust the low frequency level of the Clean channel.
17: MID: Use this control to adjust the midrange frequency level of the Clean channel.
18: HIGH: Use this control to adjust the high frequency level of the Clean channel.
19: REVERB: Use this control to adjust the amount of reverb effect: in its fully counterclockwise position
the signal will be "dry" (without any effect). As you rotate the control clockwise the amount of reverb increas-es.
20: CD INPUT: Use these RCA jacks to connect the output from a CD player or tape deck to the amplifier.
The signal at these jacks is combined into a mono signal which is sent to the internal power amp circuit.
Use the CD or tape player’s output level control to adjust the signal for the proper mix with your guitar.
21: POWER: Use this switch to turn the amplifier on (top of the switch depressed) and off (bottom of the
switch depressed). The switch illuminates when the power is on.
For further information, please visit the
of this product.
This Product was added to our catalogue on Friday, 20. July 2007.
This product is compatible too (for example):
HAMER Californian CX2 E-Guitar
MSRP 357,00 EUR
our price 279,00 EUR
incl. 19 % Tax excl.
You do not have any products in your shopping cart yet.
Welcome back !
L O G I N :
DAP-Audio X-15A Active Fullrange Speaker 15"+2" 500W
MSRP 950,00 EUR
our price 685,00 EUR
incl. 19 % Tax excl.
© MusicTrade24 2006
MusicTrade24 is not responsible for typographical errors in pricing or product specification inaccuracies in our catalogs or web site. Prices are subject to change without notice.
Parse Time: 0.124s